Active Ingredient Testing

Active chlorine is a chemical used as a disinfectant in drinking water and pool water. The disinfection efficiency of active chlorine is determined by its concentration and duration. By determining the amount of active chlorine, predictions can be made about the microbiological activity.

When chlorine species interact with water, active chlorine is formed and acts as a disinfectant. Disinfectant effect; It depends on the amount of active chlorine in the water, the pH level, the contact time with microorganisms and the temperature of the water.

There are 3 different types of chlorine used in water disinfection.

- Liquid Chlorine (Sodium Hypochlorite)

- Gas Chlorine (Chlorine Dioxide)

- Powder Chlorine (Calcium Hypochlorite)

You can contact us for “Determination of Active Chlorine” in biocidal products.

Sodium hypochlorite is a disinfectant, popularly known as bleach, used in surface cleaners.

Sodium hypochlorite; It is used in many areas such as whitening, surface cleaning, deodorization. It is used as a disinfectant due to its high antimicrobial effect. However, the uncontrolled use of sodium hypochlorite causes serious skin disorders. It is recommended that its use be restricted by authorized institutions such as the United Nations World Health Organization (WHO) and the Food and Agriculture Organization (FAO) and the European Union (EU) due to its mutagenic effects.

There are 3 different types of chlorine used in water disinfection.

You can contact us for "Determination of Sodium Hypochlorite" in biocidal products.

Hydrogen peroxide, which is popularly called oxygenated water, is known as the simplest peroxide used in disinfectants. Hydrogen peroxide is an environmentally friendly oxidizing substance used in processes such as sterilization. It can be easily used in daily cleaning processes at appropriate concentrations.

Hydrogen peroxide is widely used as a biocide, especially in applications where its decomposition into non-toxic by-products is important.

Oxidizing agents, particularly hydrogen peroxide (H2O2), are increasingly used in a number of medical, food and industrial applications, as well as in environmental applications such as water treatment. In the medical field, oxidizing agents are particularly useful for hard surface disinfection and high-level disinfection of medical devices.

You can contact us for "Determination of Hydrogen Peroxide" in biocidal products.

Iodine and iodine compounds (iodophors, povidone-iodine) are an important substance used in disinfectants. Generally, iodine and iodine compounds are used in hospitals as disinfectants and antiseptics.

It has been demonstrated in studies that especially povidone iodine shows its effectiveness on bacteria within 1 minute and suppresses reproduction. However, excessive use can cause skin irritation. Therefore, the amount of use should be kept under control.

You can contact us for "Determination of iodine and iodine compounds (iodophors, povidone-iodine)" in biocidal products.

Benzalkonium Chloride is a quaternary ammonium compound with antiseptic and disinfectant properties used in biocidal products. It is effective against gram positive and gram negative bacteria. It is generally used as a skin antiseptic and disinfectant.

The use of Benzalkonium Chloride in biocidal products at a rate of 0.1% causes an irritant effect on the mucosal surfaces, while its use at a rate of 10% causes serious skin irritation. For this reason, the determination of the "Benzalkonium Chloride" substance in the biocidal products to be used is an important parameter.

You can contact us for "Determination of Benzalkonium Chloride" in Biocidal Products.

2-phenoxyethanol; Phenoxyethanol is a colorless, oily liquid, slightly soluble in water, formed as a result of the reaction of ethylene oxide and phenol. Phenoxyethanol, which is generally used in cosmetic products, is also used in biocidal products.

Phenoxyethanol and p-hydroxybenzoic acid are generally used together to provide a broader antimicrobial effect.

Phenoxyethanol is a weak biocide. It is especially effective on gram negative bacteria, Pseudomonas aeruginosa strains.

You can contact us for "Determination of 2-phenoxyethanol" in biocidal products.

Formaldehyde is a reactive chemical that is used in many products and is harmful to human health. It is used in disinfectant products especially because of its lethal effect on insects and most microorganisms.

Formaldehyde is used in many areas apart from disinfectants. however, it has significant harm to human health. People exposed to high doses of formaldehyde are more likely to develop cancer. Studies have shown that formaldehyde, which has a carcinogenic effect, has harmful effects on the respiratory, nervous and digestive systems.

You can contact us for "Formaldehyde Determination" in biocidal products.

Glutaraldehyde, which is used in biocidal products and has an approved sterilization effect, is active in both acid and basic environments.

Alkali activated 2% glutaraldehyde solution shows sporicidal effect. Disinfection with 30-60 minutes of contact of glutaraldehyde material, and chemical sterilization with contact for 4-10 hours. The duration of action of the alkali-activated glutaraldehyde substance is between 14-28 days.

Determination of glutaraldehyde in biocidal products is considered an important parameter in order to ensure correct sterilization and to take precautions against these hazards.

You can contact us for “Determination of Gluteraldehyde” in biocidal products.

Chlorhexidine digluconate is an antiseptic and disinfectant with biguanide structure used topically in biocidal products. It is effective on gram positive and gram negative bacteria. It is preferred especially because of its permanent and fast effect.

Biocidal products containing Chlorhexidine digluconate have a bactericidal effect. It is an active substance against bacteria such as Pseudomonas aeruginosa, Escherichia coli, Aerobacter aerogenes and Proteus mirabilis that can cause hospital infections.

Biocidal products containing Chlorhexidine digluconate have a bactericidal effect. It is an active substance against bacteria such as Pseudomonas aeruginosa, Escherichia coli, Aerobacter aerogenes and Proteus mirabilis that can cause hospital infections.

You can contact us for "Determination of Chlorhexidine Digluconate" in biocidal products.

Organic acids such as lactic acid and citric acid are used for carcass disinfection, especially in chicken enterprises. Acid applications are more effective without strong bacterial bonding on the carcass surface.

Studies have shown that S. Typhimurium, salmonella and total live bacteria levels that can be found on the carcasses are significantly reduced as a result of washing with lactic acid and citric acid spraying method. However, it has toxic effects at high concentrations. Therefore, its use should be kept under control.

You can contact us for "Determination of Lactic Acid and Citric Acid" in biocidal products.

Peracetic acid is a biocidal substance with high sporicidal, bactericidal, virucidal and fungicidal effects even at very low concentrations. Peracetic acid has the ability to inactivate bacteria, viruses and fungi in about 5 minutes.

Peracetic acid provides disinfection with a concentration of 1% in a contact time of approximately 20 minutes in hospital environments. It can be performed in sterilization processes at a concentration of 2% with a contact time of 12 minutes.

You can contact us for "Peracetic Acid Determination" in biocidal products.

Ethyl Alcohol, 1-Propanol, 2-propanol (Isopropyl Alcohol), which exist in biocidal products and are allowed to be used, have a lethal effect on microorganisms. They are especially effective on microorganisms such as viruses, bacteria and fungi.

You can contact us for "Determination of Alcohol (Ethyl Alcohol, 1-Propanol, 2-propanol (Isopropyl Alcohol))" in biocidal products.

The primary use of biphenyl-2-ol is agriculture. It is especially applied after harvest due to its fungicidal feature.

It is no longer a permitted food additive in the European Union, but is still permitted as a post-harvest treatment in 4 EU countries.

You can contact us for "Determination of Biphenyl-2-ol" in biocidal products.

Methylchloroisothiazolinone, also called MCI, is a preservative with antibacterial and antifungal effects within the group of isothiazolinones. These compounds have an active sulfur moiety, which can oxidize thiol-containing residues, thereby effectively killing most aerobic and anaerobic bacteria. Methylchloroisothiazolinone is effective against gram positive and gram negative bacteria, yeast and fungi.

It is found in many water-based personal care products and cosmetics.

You can contact us for “Determination of Polyvinylpyrolidone” in biocidal products.

Methylisothiazolinone, MIT or MI (sometimes erroneously referred to as the methylisothiazolinone line), is a potent synthetic biocide and preservative within the group of isothiazolinones used in numerous personal care products and in a wide variety of industrial applications.

It is a cytotoxin that can affect different types of cells. Its use in a wide variety of personal products for humans, such as cosmetics, lotions, moisturizers, sanitary wipes, shampoos, and sunscreens, has more than doubled in the first decade of the twenty-first century and has been reported as a contact sensitizing agent.

You can contact us for “Determination of Polyvinylpyrolidone” in biocidal products.

N-(3-aminopropyl)-N-dodecyl-1,3-propanediamine is a clear, colorless to pale yellow low viscosity liquid with an amine-like odor, its aqueous solutions are strongly alkaline. As a surfactant, DPTA shows strong foaming and is compatible with nonionic, cationic and some anionic surfactants. The compound is biodegradable.

You can contact us for “Determination of Polyvinylpyrolidone” in biocidal products.

PVP is used in some contact lenses and their packaging solutions. It reduces friction, thereby acting as a lubricant or wetting agent built into the lens

PVP was also the basis of early formulas for shampoos, toothpastes, hair sprays and hair gels used in personal care products such as

You can contact us for “Determination of Polyvinylpyrolidone” in biocidal products.

It is used as a disinfectant, biocide and industrial deodorant. Found in some modern water purification tablets / filters.

As a disinfectant, it is used to sterilize drinking water, swimming pools and air, and as a routine disinfectant to fight infectious diseases.

You can contact us for “Determination of Sodium dichloroisocyanurate dihyrate” in biocidal products.

It is mainly used as a disinfectant, algaecide and bactericide for swimming pools and dyestuffs. It is also used as a bleaching agent in textiles.

Trichloroisocyanuric acid used in swimming pools is easier to use than chlorine gas. It dissolves slowly in water, but as it reacts, it causes a build-up of cyanuric acid in the pool.

You can contact us for “Determination of Trichloroisocyanuric acid” in biocidal products.

By adopting the compound form of O-phthalaldehyde disinfectant and alkylene aliphatic sulfonic anhydride, a good synergistic sterilization effect is achieved and no foam, and spraying and immersion disinfection can be met.

O-phthalaldehyde active ingredient used in Chemical Disinfectants and Antiseptics is accredited with appropriate test and analysis methods.

You can contact us for “Determination of o-Phthalaldehyde” in biocidal products.

2-Phenylphenol is a member of the hydroxybiphenyl class, which is biphenyl substituted with a hydroxy group at position 2. It is often used as a post-harvest fungicide for citrus fruits. It has an environmental food contaminant and antifungal agrochemical role. It is derived from the hydride of a biphenyl.

The active ingredient of 2-Phenylphenol used in Chemical Disinfectants and Antiseptics is accredited with appropriate test and analysis methods.

You can contact us for “Determination of 2-Phenylphenol” in biocidal products.

Silver is often used as an alternative disinfectant in applications where the use of traditional disinfectants such as chlorine may result in the formation of toxic by-products or cause corrosion on surfaces. It has also been shown that silver produces a synergistic effect with many other disinfectants.

Silver active ingredient used in Chemical Disinfectants and Antiseptics is accredited with appropriate testing and analysis methods.

You can contact us for "Determination of Silver, Silver Nitrate and Colloidal Silver" in biocidal products.

Didecyldimethylammonium chloride (DDAC) Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Dididesylmethylammonium chloride (DDAC)" in biocidal products.

Determination of 2-Phenylphenol is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of 2-Phenylphenol" in biocidal products.

The determination of N-(3-aminopropyl)-N-dodecyl-1,3-propanediamine is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of N-(3-aminopropyl)-N-dodecyl-1,3-propanediamine" in biocidal products.

Methylisothiazolinone Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Methylisothiazolinone" in biocidal products.

Determination of Salicylic Acid is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Salicylic Acid" in biocidal products.

Determination of N,N-diethyl m-toluamide (DEET) is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of N,N-diethyl m-toluamide (DEET)" in biocidal products.

Isopropyl Alcohol Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Isopropyl Alcohol" in biocidal products.

Benzoic Acid Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Benzoic Acid Determination" in biocidal products.

Zinc Pyrithione Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Zinc Pyrion" in biocidal products.

Trichloroisocyanuric Acid (TCCA) Determination is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Trichloroisocyanuric Acid (TCCA)" in biocidal products.

The determination of PHMB (Polyhexamthylenbiguanid Hydrochloride) is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of PHMB (Polyhexamthylenbiguanid Hydrochloride)" in biocidal products.

Chlorine Dioxide Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Chlorine Dioxide" in biocidal products.

Piperonyl Butoxide (PBO) Determination is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Piperonyl Butoxide (PBO)" in biocidal products.

Sodium Benzoate Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Sodium Benzoate" in biocidal products.

Potassium Hydrogen Monopersulfate (PMPS) Determination is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Potassium Hydrogen Monopersulphate (PMPS)" in biocidal products.

Hydrochloric Acid Determination is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Hydrochloric Acid" in biocidal products.

Tetrakis (hydroxymethyl)phosphonium sulfate (THPS) Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Tetrakis (hydroxymethyl)phosphonium sulfate (THPS)" in biocidal products.

Acetic Acid Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Acetic Acid" in biocidal products.

Dimethylamine - Epichlorohydrin Polymer Determination is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Dimethylamine - Epichlorohydrin Polymer Determination" in biocidal products.

The Copper (Cu) Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Copper (Cu)" in biocidal products.

The determination of 1,2-Benzisothiazol-3(2H)-one(BIT) is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of 1,2-Benzisothiazol-3(2H)-one(BIT)" in biocidal products.

Chloramine-T Determination is carried out within the scope of "Agent Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Chloramine-T" in biocidal products.

Calcium Hypochlorite Determination is carried out within the scope of "Active Substance Tests" in Chemical Disinfectants and Antiseptics.

You can contact us for "Determination of Calcium Hypochlorite" in biocidal products.